SAAB WIS ONLINE

PRE-RELEASE

Rear Window Wiper Motor Replacement

Rear Window Wiper Motor Replacement



Callout Component Name

Preliminary Procedures

1. Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement .

2. Remove the rear window wiper arm. Refer to Rear Window Wiper Arm Replacement .


1 Rear Window Wiper Motor Bolt (Qty: 3) Refer to Fastener Caution .

Tighten

9 N m (80 lb in)
2 Rear Window Wiper Motor Assembly

Procedure

1. Disconnect the electrical connector to the wiper motor.

2. Carefully pull the wiper motor from the wiper motor pivot shaft seal.

3. Inspect the wiper pivot shaft seal and replace if worn or shows signs of cracking.




PRE-RELEASE