SAAB WIS ONLINE

PRE-RELEASE

Output Speed Sensor Replacement

Output Speed Sensor Replacement



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the control valve lower body and upper body. Refer to Control Valve Lower Body and Upper Body Replacement .


1 Output Speed Sensor Bolt M6 x 25 Refer to Fastener Caution .

Tighten

12 Nm (106 lb in)
2 Output Speed Sensor

Procedure

Perform the service programming system procedure. Refer to Service Programming System (SPS) .
Note

After an internal transmission repair or internal part replacement the service programming system procedure should be performed.




PRE-RELEASE