PRE-RELEASE
Liftgate Adjustment
| Liftgate Adjustment |
| 1. |
Note the original position of the liftgate latch striker.
|
|
| 2. |
Loosen the striker. Refer to
Liftgate Latch Striker Replacement
.
|
|
| 3. |
Loosen the hinge-to-roof panel bolts for forward or rearward adjustments.
|
|
| 4. |
If adjusting the hinge-to-roof panel bolts, lower the rear headliner as needed. Refer to
Headlining Trim Panel Replacement (With C3U)
Headlining Trim Panel Replacement (Without C3U)
.
|
|
| 5. |
Loosen the liftgate-to-hinge bolts for up and down adjustment.
|
|
| 6. |
Move the liftgate within the liftgate opening to achieve the best alignment and operation.
|
|
| 7. |
Position the striker to approximately the proper position.
|
|
| 8. |
Adjust the striker to achieve the best operation and alignment of the liftgate.
|
|
| 9. |
Inspect the seals for proper engagement.
|
|
| 10. |
Refer to
Fastener Caution
.
Tighten the hinge-to-roof bolts when the proper adjustment is achieved to 25 Nm (18 lb ft) . |
|
