SAAB WIS ONLINE

PRE-RELEASE

Driver or Passenger Seat Cushion Frame Replacement

Driver or Passenger Seat Cushion Frame Replacement



Callout Component Name
Refer to SIR Warning .

Preliminary Procedures

1. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .

2. Preload test the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .


1 Driver or Passenger Seat Back Cushion Frame Bolt (Qty: 4) Refer to Fastener Caution .

Tighten

35 Nm (26 lb ft)
2 Driver or Passenger Seat Cushion Frame

Procedure

1. Disconnect any electrical connectors as necessary.

2. When replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable Restraint Front Passenger Presence Sensor Replacement .

3. If replacing with a new front seat cushion, transfer components as necessary.




PRE-RELEASE