SAAB WIS ONLINE

PRE-RELEASE

Sunroof Frame Replacement

Sunroof Frame Replacement



Callout Component Name

Preliminary Procedures

1. Remove both sunroof windows from the frame. Refer to Sunroof Window Replacement - Front and Sunroof Window Replacement - Rear .

2. It is only necessary to lower the headliner. Only do those steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (With C3U) Headlining Trim Panel Replacement (Without C3U) .


1 Sunroof Frame Fastener (Qty: 16) Refer to Fastener Caution .

Procedure

1. Sunroof frame has eight fastener on each side.

2. It will be necessary to have assistant to remove the sunroof frame from the vehicle.

3. Disconnect the electrical connectors.

4. Disconnect the drain hoses from the frame.

5. Install a double layer of masking tape around the perimeter of the painted surfaces and protect the interior trim.

6. Remove the sunroof frame through the liftgate opening.


Tighten

5.5 Nm(49 lb in)
2 Sunroof Frame

Procedure

1. Place the sunroof on a soft surface.

2. Transfer all necessary parts.

3. Ensure that the window operate properly. Refer to Sunroof Window Height and Opening Fit Adjustment and Sunroof Motor/Actautor Initialization/Teach Process Sunroof Motor/Actuator Initialization/Teach Process .

4. Water test the vehicle before installing the headlinder.




PRE-RELEASE