Sunroof Housing Front Drain Hose Replacement
|
|
Sunroof Housing Front Drain Hose Replacement
|
|
4.
|
|
Note
|
|
If the work concerns the drainage hose on the left side, the windscreen wiper linkage must be removed to access the drainage hose lead-through.
|
If the work concerns the left side, dismantle the
windscreen wiper linkage.
|
|
5.
|
If the work concerns the right side, remove the air duct plate to access the drainage hose lead-through.
|
|
6.
|
Disengage the sunroof drain hose from the attachment points on the windshield pillar (1).
|
|
7.
|
Disconnect the front sunroof drain hose from the sunroof drain spigot (2).
|
|
8.
|
Loosen the drainage hose and lead-through (3) from the cover panel.
|
|
9.
|
Remove the hose (4) from the vehicle
|
|
1.
|
With the help of an assistant, position the lead-through (3) in the hole in the cover panel.
|
|
2.
|
|
Note
|
|
To avoid water leakage, verify the lead-through connection to the cover panel.
|
Use a thin, elongate tool to press the the lead-through end of the hose into the hole, while the assistant, outside the car, guides it into position.
|
|
3.
|
Connect the front sunroof drain hose to the sunroof drain spigot (2).
|
|
4.
|
Fit the sunroof drain hose from the attachment points on the windshield pillar (1).
|
|
6.
|
Water test the vehicle before installing the headlinder.
|
|
7.
|
If the work is performed the right side, fit the air duct plate on the cover panel.
|
|
9.
|
Check the sunroof with respect to correct operation.
|
