PRE-RELEASE
Washer fluid reservoir
| Washer fluid reservoir |
| To remove |
| 1. |
Drain the washer fluid from the reservoir.
|
|
| 2. |
Remove the bumper, see
Front bumper
.
|
|
| 3. |
Pull out the two pumps and the level sensor from the reservoir and let them hang by their hoses and leads.
|
|
| 4. |
Remove the washer fluid reservoir.
|
|
| To fit |
| 1. |
Place the reservoir in its correct position and fit the retaining screws.
|
|
| 2. |
Fit the pumps.
|
|
| 3. |
Fit the level sensor with its float pointing downwards.
|
|
| 4. |
Fit the bumper, see
Front bumper
.
|
|
| 5. |
Lower the car.
|
|
| 6. |
Fill the reservoir with washer fluid.
|
|
