P0182
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Fuel Temperature Sensor Circuit. Short to Ground
Fault symptoms
On-Board Diagnostics
Type of diagnosis:
Enable criteria:
|
-
|
Battery voltage should be 10.2-15.8 V.
|
Fault criteria:
|
-
|
Voltage on input falls below 0.12 V for more than 3 s.
|
Dependents:
System reaction to a fault:
|
-
|
The control module will continue to work with a substitute value of 25 °C.
|
OK report:
|
-
|
Voltage on input exceeds 0.12 V for more than 3 s.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Diagnostic help
Read value:
Fuel Temperature (
Fuel Temperature Sensor)
See also description of read value under
"Read Values" menu
for more information.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.
