P0245
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Loss of performance.
Boost Pressure Control Valve Circuit. Open / Short to Ground.
Fault symptoms
On-Board Diagnostics
Type of diagnosis:
Enable criteria:
|
-
|
Boost pressure control active.
|
|
-
|
Battery voltage between 10.2 - 15.8 V
|
Fault criteria:
|
-
|
The voltage on the input is less than 20% of the battery voltage for more than 0.3 s. (Battery voltage x 0.2 = limit for DTC.)
|
Dependents:
System reaction to a fault:
|
-
|
The following limitations apply: Pedal position sensor adjustable to max 30 % and EGR and boost pressure control switched off.
|
OK report:
|
-
|
When the voltage on the input is greater than or equal to 20% of the battery voltage for more than 0.3 s.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Diagnostic help
Fault diagnosis concerns leakage in the intake system and faulty function of the boost pressure sensor and mass air flow sensor.
Functions in the diagnostic tool related to the fault:
|
-
|
Read value:
Charge Air Control Valve
|
See also description of read value under
"Read Values" menu
for more information.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.
