P0335
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Loss of performance.
Crankshaft Position Sensor Circuit. No Signal.
Fault symptoms
On-Board Diagnostics
Type of diagnosis:
Enable criteria:
|
-
|
The engine speed exceeds 730 rpm
|
Fault criteria:
|
-
|
Faulty crankshaft signal for more than 15 crankshaft rotations.
|
Dependents:
|
-
|
P0200, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277 and P1200.
|
System reaction to a fault:
|
-
|
The following limitations apply: Pedal position sensor adjustable to max 40 %, total fuel quantity max 30 mm
3
/combustion, engine speed fixed at 1000 rpm.
|
OK report:
|
-
|
Valid camshaft signal for more than 15 crankshaft rotations.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Diagnostic help
Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.
See also description of read value under
"Read Values" menu
for more information.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.
