PRE-RELEASE
P0501
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE. Cruise control not working.
| P0501 |
Fault symptoms
| • |
CHECK ENGINE.
|
|
| • |
Cruise control not working.
|
|
On-Board Diagnostics
Type of diagnosis:| - |
Continuous.
|
|
Enable criteria:
| - |
Engine running.
|
|
Fault criteria:
| - |
The speed change between two signals from ABS exceeds 50 km/h.
|
|
Dependents:
| - |
None.
|
|
System reaction to a fault:
| - |
The following limitations apply: ECM will continue to use a substitute value of 0 km/h and cruise control is switched off.
|
|
OK report:
| - |
When the speed change between two signals from ABS falls below 50 km/h.
|
|
Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)
| - |
Type III.
|
|
Diagnostic help
Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.Functions in the diagnostic tool related to the fault:
| - |
Read value:
Vehicle Speed
|
|
On cars equipped with TC/ABS, the speed signal travels on the BUS.
See also description of read value under "Read Values" menu for more information.
