PRE-RELEASE
Changing the rear bumper shell/cellular block, 4D
| Changing the rear bumper shell/cellular block, 4D |
| To remove |
| 1. |
Remove the bumper. See
Rear bumper, 4D
Lay it on a well protected workbench.
|
|
| 2. |
Loosen the upper cellular block from the protective shell. Lift it out from the bumper rail (it is wedged into the bumper rail).
|
|
| 3. |
Remove the two cellular blocks that sit on each side of the protective shell. Loosen the bumper rail from the clips securing it to the protective shell.
|
|
| 4. |
Loosen the cellular block from the protective shell (wedged into the protective shell's retaining wedges).
|
|
| To fit |
| 1. |
Press the cellular block into the protective shell's retaining wedges.
|
|
| 2. |
Fit the bumper rail.
|
|||||||
| 3. |
Fit the upper cellular block.
|
|
| 4. |
Fit the two cellular blocks on the sides of the protective shell.
|
|
| 5. |
Fit the bumper on the car. See
Rear bumper, 4D.
|
|
