PRE-RELEASE
Checking compression
| Checking compression |
| Checking |
| 1. |
Remove
Glow plug (398), Z19
.
|
|
| 2. |
Fit
32 025 018 Compression check adapter
to cylinder 1.
|
|
| 3. |
Connect a compression gauge with a measurement range between 10 and 40 bar to the adapter.
|
|
| 4. |
Run the starter motor at a speed of at least 200 rpm until the pointer on the compression gauge stops rising.
|
|
| 5. |
Remove the compression gauge and adapter.
|
|
| 6. |
Measure the compression on cylinders 2-4.
|
|
| 7. |
The maximum permitted pressure difference between cylinders is 150 hPa (1.5 bar)
|
|
| 8. |
Fit
Glow plug (398), Z19
.
|
|
