SAAB WIS ONLINE

PRE-RELEASE

Radio Replacement

Radio Replacement



Callout Component Name

Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the Instrument panel upper trim panel . Refer to Instrument Panel Upper Trim Panel Replacement .

3. Remove the driver information display UDT, if installed. See Driver Information Display Replacement (UAG/UFD) Driver Information Display, Replacement (UDT)


1

Radio Fastener (Qty: 4 )

See Fastener Caution .

Tighten

2.5 Nm (22 lb in)

2

Radio


Procedures

1. Disconnect the electrical connectors.

2. After repairs, refer to Control Module References for programming and set up information.




PRE-RELEASE