PRE-RELEASE
Pre-delivery service
| Pre-delivery service |
The materials required for the pre-delivery service are enclosed in the vehicle's glove box and luggage compartment.
| 1. |
Unlock the vehicle.
|
|
| 2. |
Remove the
Paint protector film
.
|
|
| 3. |
Remove the
Transport supports
from the suspension.
|
|
| 4. |
Remove the
Brake disc transit protection
(certain markets).
|
|
| 5. |
Perform
Battery check/test
. Check that the battery's terminal clamps are securely fastened. Charge the battery 60 days after the production date.
|
||||||||||
| 6. |
Fit the battery cover.
|
|
| 7. |
Check tyre pressure and check that the repair spray can and tool kit are complete.
|
|
| 8. |
Check the level and top up the following fluids:
|
|
| - |
Washer fluid
|
| - |
Engine Oil
|
| - |
Coolant
|
| - |
Brake Fluid
|
| - |
Power steering fluid
|
| 9. |
Remove the protection from, amongst other things, the following locations in the cabin:
|
|
| - |
Seats
|
| - |
The steering wheel
|
| - |
Floor, driver's side
|
| - |
Sills, front
|
| - |
Navigation unit display
|
| 10. |
Fit the extra mats in place (not US/CA).
|
|
| 11. |
Remove the VIN label from the side window on the rear door.
|
|
| 12. |
Take out the enclosed parts from the glove box.
|
|
| 13. |
Deactivate vehicle transport mode (applies to certain markets only), refer to Transport Mode Deactivation.
|
|
| 14. |
Set the date and time. Refer to the vehicle owners manual.
|
|
| 15. |
Check the function of the washer and wiper system.
|
|
| 16. |
Check the front seats' heating.
|
|
| 17. |
Multi-info display (MID), Triple-info display (TID). Check the radio, remote control, function check, infotainment, language setting.
|
|
| 18. |
Clear the diagnostic trouble codes in all systems.
|
|
| 19. |
Program the electric windows, see
Window motor, programming and setting
.
|
|
| 20. |
Fit the number plate in accordance with the instructions. Fit
Number plate, front
,
Number plate, rear (not US/CA)
.
|
|
| 21. |
Remove the towing eye, close the cover, remove the spare wheel and place the towing eye in the tool compartment. Fit the spare wheel if included
|
|
| 22. |
Retighten the wheel nuts. Tightening torque:
150 Nm
|
|
| 23. |
Vehicles with steel rims: Fit wheel trims.
|
|
| 24. |
Check all locks: bonnet, doors (door closing, child safety locks), rear seat backrests, filler cap, bootlid/tailgate.
|
|
| 25. |
Diesel vehicles: Check that the filler cap is marked "Diesel". Applies to Croatia and Serbia only.
|
|
| 26. |
Visual inspection of parking brake (unloaded wheels), brake lines and brake hoses, fuel lines, silencer, exhaust system, front suspension, rear suspension, track rods, link arms, power unit sealing integrity.
|
|
| 27. |
Road test the vehicle.
|
|
| 28. |
Check that no new diagnostic trouble codes have been detected in any system.
|
|
| 29. |
Clean the vehicle.
|
|
