PRE-RELEASE
Sunroof Sunshade Motor Replacement
| Sunroof Sunshade Motor Replacement |
| Removal Procedure |
| 1. |
It is only necessary to lower the headliner. Only perform the steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Refer to
Headlining Trim Panel Replacement (Without Sunroof)
Headlining Trim Panel Replacement (With Sunroof)
.
|
|
| 2. |
Remove the power sunroof motor.
|
|
| 2.1. |
Remove the 3 bolts (1).
|
| 2.2. |
Disconnect the wiring harness plug (2).
|
| Installation Procedure |
| 1. |
Install the power sunroof motor.
|
|
| 2. |
Refer to
Fastener Caution
Connect the wiring harness plug. TightenTighten the 3 bolts to 7 Nm (62 lb in). |
|
| 3. |
Verify the operation of the sunroof.
|
|
| 4. |
When replacing the motor/actuator. Refer to
Sunroof Motor/Actuator Initialization/Teach Process (New motor)
Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor)
.
|
|
| 5. |
Install the headlining. Refer to
Headlining Trim Panel Replacement (Without Sunroof)
Headlining Trim Panel Replacement (With Sunroof)
.
|
|
