PRE-RELEASE
Trim, headlining
| Trim, headlining |
| Note | ||
|
Lift out the headlining through the luggage compartment once it has been detached. |
| 1. |
Remove the sun visors.
|
|
| 2. |
Undo the cover on the rear-view mirror mounting in the roof (fastened with clips).
|
|
| 3. |
Remove the rear-view mirror.
Cars with sunroof: |
|
| 4. |
Detach the lamp from the motor bracket (fastened with 2 clips) and disconnect the bulb from the connector.
|
|
| 5. |
Undo the bracket retaining screws and pull it loose.
|
|
| 6. |
Loosen the strip around the sun roof. Unplug the connector to the sun roof motor.
|
|
| 7. |
Undo the console for the interior lighting.
|
|
| 8. |
Undo the door weather seals on the A-pillars.
|
|
| 9. |
Pull off the A-pillar trim (fastened with clips).
|
|
| 10. |
Remove the courtesy handle.
3-door: |
|
| 11. |
Remove the B-pillar trim,
.
5-door:Left-hand B-pillar |
|
| 12. |
Remove the top inner trim from the left-hand B-pillar (fastened with clips).
|
|
| 13. |
Remove the top clip on the top inner trim on the left-hand B-pillar
Right-hand B-pillar |
|
| 14. |
Remove the pillar trim,
.
|
|
| 15. |
Remove the C-pillar trim,
.
|
|
| 16. |
Undo the fasteners in rear of the headlining. Turn the clips 90°.
|
|
| 17. |
Undo the door weatherstrip securing the headlining.
|
|
| 18. |
Fold down the headlining.
|
|
| 19. |
Detach the wiring harness from the headlining (secured with adhesive tape).
|
|
| 20. |
Unplug the connectors to the reading lamps above the front seats.
|
|
| 21. |
Unplug the connector for the rear reading lamp.
|
|
| 22. |
Lift out the headlining through the luggage compartment.
|
|
| To fit |
Fit in reverse order.
Tightening torque:
Belt adjuster bolts: 24 Nm (18 lbf ft).
