PRE-RELEASE
Transmission Rear Mount Replacement (AWD)
| Transmission Rear Mount Replacement (AWD) |
| Removal Procedure |
| 1. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
|
| 2. |
Remove the propeller shaft from the vehicle. Refer to
Propeller Shaft Replacement
.
|
|
| 3. |
If equipped with LF1, remove the right catalytic converter. Refer to
Catalytic Converter Replacement - Right Side (LF1)
.
|
|
| 4. |
Use a suitable jack to support the transaxle.
|
|
| 5. |
With a jack, slightly take the weight off mount, and remove the transaxle mount to frame fasteners (3, 4).
|
|
| 6. |
Remove the transaxle mount thought bolt (1).
|
|
| 7. |
Remove the transaxle mount from the vehicle (2).
|
|
| 8. |
Remove the transaxle bracket to transfer case fasteners (1).
|
|
| 9. |
Remove the bracket from the vehicle.
|
|
| Installation Procedure |
| 1. |
Position the transaxle bracket to the transaxle.
|
|
| 2. |
Hand-tighten the transaxle mount bracket (2) to transfer case bolts.
|
|
| 3. |
Refer to
Fastener Caution
.
Install the transaxle brackets bolts and tighten to 100 Nm (74 lb ft) |
|
| 4. |
Install the transaxle mount the frame.
|
|
| 5. |
Install the longer transaxle mount to frame bolt (3) and tighten to
62 Nm (46 lb ft)
|
|
| 6. |
Install the short transaxle mount to frame bolts (4) and tighten to
100 Nm (74 lb ft)
|
|
| 7. |
Install the bolt and tighten to
100 Nm (74 lb ft)
|
|
| 8. |
Remove the support from the transaxle.
|
|
| 9. |
Install the propeller shaft. Refer to
Propeller Shaft Replacement
|
|
| 10. |
If removed, install the right catalytic converter. Refer to
Catalytic Converter Replacement - Right Side (LF1)
.
|
|
| 11. |
Lower the vehicle.
|
|
