PRE-RELEASE
Pre-delivery service
| Pre-delivery service |
| 1. |
Washer fluid, top up.
|
| 2. |
Insert main fuse No. 1 in the main fuse box.
|
| 3. |
Program the anti-theft alarm. Affix anti-theft alarm labels.
|
| 4. |
OBD II specification cars: connect an ISAT scan tool and clear any diagnostic trouble codes in the engine and automatic transmission management systems.
|
| 5. |
Saab Information Display: set the clock, program the SID.
|
| 6. |
Program the ACC and radio anti-theft code.
|
| 7. |
Check operation of wash-wipe systems.
|
| 8. |
Tyre pressures, check and adjust.
|
| 9. |
Wheel bolts, tighten with prescribed torque.
|
| 10. |
Check oil and fluid levels, inspect for leaks, top up. Engine, automatic transmission and power steering.
|
| 11. |
Check coolant and fluid level, inspect for leaks, top up as necessary. Cooling system, brake and clutch systems.
|
| 12. |
Turbo: Plug the electric lead into the boost pressure control valve.
|
| 13. |
Raise the car and inspect the underbody for transit damage. Note that the corrosion protection (underseal) should also be intact.
|
||||||||||
| 14. |
Brake disc transit protection, remove.
|
| 15. |
Retighten the rear axle mounting.
|
| 16. |
Fit the cover panel in the spoiler. Put the tools in place and fit the supplied equipment.
|
| 17. |
Cars for the European market, M1997: Certificate of Conformity".
|
| 18. |
Road test
|
| 19. |
. OBD II specification car: Connect an ISAT scan tool and check that no new diagnostic trouble codes have been detected in the engine and automatic transmission management systems after the road test.
|
| 20. |
Cleaning
|
